TP-Link TL-SG2016P | 16 Port Gigabit Smart Managed PoE Switch | 8 PoE+ Port @120W | Support Omada SDN | PoE Recovery | IPv6 | Static Routing | L2/L3/L4 QoS | 5 Year Manufacturer Warranty
October 29, 2023
YuLinca PoE Switch, 10 Port Poe Switch (8 Port PoE+ 100Mbps with 2 Gigabit Uplink), 96W 802.3af/at PoE 100Mbps, Fanless Unmanaged Plug&Play Ethernet Switch
October 29, 2023
Lynxcel 8-Port PoE Gigabit Industrial Ethernet Switch, 96W PoE 48V Output, IP40 Unmanaged Din Rail Switch, 16Gbps Switching Capacity, for IP Camera, VoIP System and PoE Monitor (with Power Supply)
Product Description
This 8-Port PoE Industrial Ethernet Switch is specially designed for harsh industrial and outdoor environments.
Such as: Solar Power Energy, Manufacturing, Intelligent Transpotation, Factories, Warehouse, Refineries and Garage Wall, Vehicle, RV Park, Attic, Barn.
Network expansion & Video surveillance & Power over ethernet
Please Note: Work with the standard 48V PoE devices, don’t work with 12V PoE devices.
Such as : PoE cameras, wireless access points, access control, printer, router etc. (Standard 48V PoE Output)
The total PoE Output of this industrial ethernet switch is 96W, each port can reach up to 30W.
Support Stanard 48V PoE IEEE 802.3af/at PoE Devices
Suitable for a wide range of devices
Product Specifications
Interface Parameters: 8x 10/100/1000Base-TX PoE port • Auto-negotiation of Half-Duplex / Full-Duplex.
Standards and Protocols: IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3x Full duplex and flow control • IEEE 802.3af/at PoE.
Temperature and Humidity: Operating Temperature :-40~185°F • Relative Humidity: 5% to 95% non-condensing.
Switch Properties: Switching Capacity: 16Gbps • Forwarding Rate: 1.488Mbps • MAC Address Table: 2K • Packet Buffer: 2MB • Jumbo Frame: 10K.
Protection Grade: IP40 Protection
Installation: DIN-Rail
Delay Time: <3μs
Power Characteristics: Power Input : DC 12~52V • PoE Standard : IEEE 802.3af/at PoE • PoE Power Budget : 30W Per PoE Port • Power Consumption : <4W • Protection : Overload current protection, Reverse polarity protection.
MTBF: >50,000Hrs
Cooling Method: No-fan, low power natural cooling
Stability: CE , FCC, RoHS • IEC 60068-2-6 Fc (Vibration) • IEC 60068-2-27 Ea (Shock) • EN 61000-4-4 (Burst Standards) •EN 61000-4-8 (Magnetic Field Standards) • EN 61000-4-5 (Surge Standards): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV.
Processing Type: Store and Forward
Product Features:
4KV Lightning Protection
Lynxcel Industrial ethernet switche has 4KV power port surge protection and 2KV network port, grounding design can effectively anti-lightning and electrostatic interference, suitable for the harsh electromagnetic environment.
Wide Temperature Operation
This industrial switch is designed in strict accordance with the industrial temperature of -40~185°F, selects industrial-grade devices, adopts a fanless low-power heat dissipation design, and is fearless against extreme temperatures, ensuring that the equipment can work stably for a long time within this temperature range.
DIN Rail Mounting
Adopt 35mm standard DIN-rail design, easy to install. It can be installed in a control box with compact space, and can be integrated into industrial control automation, equipment integration and monitoring electric box.
Dual Redundant Power Inputs: When one of the DC power is fail, the relay will be trigger.
Please Kindly Note for installing power wires: When installing power wires, insert the power wires into corresponding polarity signal holes. Insert the Red wire into P1+ or P2+, and the Black wire into P1- or P2-, and tighten them to ensure that the power wires do not fall off when the industrial switch is moved, then plug it into the power outlet.
What’s Included:
1 x 8 Port PoE Gigabit Industrial Ethernet Switch
1 x 96W UL AC Power Adapter
1 x One Meter Power Cable
1 x User Manual
【96W PoE Output】The total power output of this industrial PoE switch is 96W for 8 PoE ports, can up to 30W each port. The PoE DC Output is standard 48V PoE, don’t work will 12V PoE devices. Work with IEEE 802.3af/at PoE compliant PDs.
【Industrial Grade Design】This industrial switch has IP40 anti-dust, -40~185°F wide temperature range, 4KV lightning protectin, anti-static, anti-electromagnetic interference, surge protection, which is suitable for all kinds of environments, and can maintain a long time stable transmission.
【Dual Redundant Power Supply】This industrial ethernet switch can automatic fault switching, with anti-overload protection, anti-reverse connection protection, will not damage the equipment. The redundant power input voltage is 12-52V DC.
【DIN Rail Mounting】This din rail PoE switch adopts high strength aluminum alloy shell, corrugated heat groove, natural heat dissipation fast. 35mm standard din rail, easy to install and disassemble.
【Grounding Point】This hardened unmanaged din rail gigabit ethernet switch has a grounding point to prevent static electricity from damaging the switch and reduce the risk of electric shock.
【Wide Application】Plug and play, no configuration required, for IP PTZ camera, IP phone, wireless ap and other PoE devices in a variety of harsh environments.
Product Description
This 8-Port PoE Industrial Ethernet Switch is specially designed for harsh industrial and outdoor environments.
Such as: Solar Power Energy, Manufacturing, Intelligent Transpotation, Factories, Warehouse, Refineries and Garage Wall, Vehicle, RV Park, Attic, Barn.
Network expansion & Video surveillance & Power over ethernet
Please Note: Work with the standard 48V PoE devices, don’t work with 12V PoE devices.
Such as : PoE cameras, wireless access points, access control, printer, router etc. (Standard 48V PoE Output)
The total PoE Output of this industrial ethernet switch is 96W, each port can reach up to 30W.
Support Stanard 48V PoE IEEE 802.3af/at PoE Devices
Suitable for a wide range of devices
Product Specifications
Interface Parameters: 8x 10/100/1000Base-TX PoE port • Auto-negotiation of Half-Duplex / Full-Duplex.
Standards and Protocols: IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3x Full duplex and flow control • IEEE 802.3af/at PoE.
Temperature and Humidity: Operating Temperature :-40~185°F • Relative Humidity: 5% to 95% non-condensing.
Switch Properties: Switching Capacity: 16Gbps • Forwarding Rate: 1.488Mbps • MAC Address Table: 2K • Packet Buffer: 2MB • Jumbo Frame: 10K.
Protection Grade: IP40 Protection
Installation: DIN-Rail
Delay Time: <3μs
Power Characteristics: Power Input : DC 12~52V • PoE Standard : IEEE 802.3af/at PoE • PoE Power Budget : 30W Per PoE Port • Power Consumption : <4W • Protection : Overload current protection, Reverse polarity protection.
MTBF: >50,000Hrs
Cooling Method: No-fan, low power natural cooling
Stability: CE , FCC, RoHS • IEC 60068-2-6 Fc (Vibration) • IEC 60068-2-27 Ea (Shock) • EN 61000-4-4 (Burst Standards) •EN 61000-4-8 (Magnetic Field Standards) • EN 61000-4-5 (Surge Standards): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV.
Processing Type: Store and Forward
Product Features:
4KV Lightning Protection
Lynxcel Industrial ethernet switche has 4KV power port surge protection and 2KV network port, grounding design can effectively anti-lightning and electrostatic interference, suitable for the harsh electromagnetic environment.
Wide Temperature Operation
This industrial switch is designed in strict accordance with the industrial temperature of -40~185°F, selects industrial-grade devices, adopts a fanless low-power heat dissipation design, and is fearless against extreme temperatures, ensuring that the equipment can work stably for a long time within this temperature range.
DIN Rail Mounting
Adopt 35mm standard DIN-rail design, easy to install. It can be installed in a control box with compact space, and can be integrated into industrial control automation, equipment integration and monitoring electric box.
Dual Redundant Power Inputs: When one of the DC power is fail, the relay will be trigger.
Please Kindly Note for installing power wires: When installing power wires, insert the power wires into corresponding polarity signal holes. Insert the Red wire into P1+ or P2+, and the Black wire into P1- or P2-, and tighten them to ensure that the power wires do not fall off when the industrial switch is moved, then plug it into the power outlet.
What’s Included:
1 x 8 Port PoE Gigabit Industrial Ethernet Switch
1 x 96W UL AC Power Adapter
1 x One Meter Power Cable
1 x User Manual
【96W PoE Output】The total power output of this industrial PoE switch is 96W for 8 PoE ports, can up to 30W each port. The PoE DC Output is standard 48V PoE, don’t work will 12V PoE devices. Work with IEEE 802.3af/at PoE compliant PDs.
【Industrial Grade Design】This industrial switch has IP40 anti-dust, -40~185°F wide temperature range, 4KV lightning protectin, anti-static, anti-electromagnetic interference, surge protection, which is suitable for all kinds of environments, and can maintain a long time stable transmission.
【Dual Redundant Power Supply】This industrial ethernet switch can automatic fault switching, with anti-overload protection, anti-reverse connection protection, will not damage the equipment. The redundant power input voltage is 12-52V DC.
【DIN Rail Mounting】This din rail PoE switch adopts high strength aluminum alloy shell, corrugated heat groove, natural heat dissipation fast. 35mm standard din rail, easy to install and disassemble.
【Grounding Point】This hardened unmanaged din rail gigabit ethernet switch has a grounding point to prevent static electricity from damaging the switch and reduce the risk of electric shock.
【Wide Application】Plug and play, no configuration required, for IP PTZ camera, IP phone, wireless ap and other PoE devices in a variety of harsh environments.
Reviews
There are no reviews yet.